Ctzx7550 Vertical Horizontal Drilling and Milling Machine

• Customization: Available
• After-sales Service: 1.5year
• Warranty: 1 Year
• Model NO.: CTZX7550
• Control Type: Artificial
• Automatic Grade: Manual
• Power Source: Electric
• Type: Open Mixing Mill
• Spindle Taper: Mt4
• Table Travel Xmm): 600
• Table Travel (Y) mm): 230
• Machining Capacity: Heavy Duty
• Table Travel Zmm): None
• Range of Spindle Speed(r.p.m): 60-1350r.p.m
• Transport Package: Wooden Case
• Specification: 130*114*122cm
• Trademark: CTMACH
• Origin: China
• Package Size: 130.00cm * 114.00cm * 222.00cm
• Package Gross Weight: 1050.000kg

Product Description

CTZX7550 Vertical Horizontal Drilling and Milling Machine

Milling, drilling, tapping, reaming, boring Headstock can be rotated 90 degrees vertically large worktable Spindle micro-feed (automatic feed is a special accessory) High-load tapered roller bearings support the spindle The spindle can be locked and the machine head can be raised and lowered Adjustable table gap setting Adjustable worktable limit Gear box drive, low noise Accurate positioning, strong rigidity and large cutting force

Vertical and horizontal dual-purpose drilling and milling machine, the vertical milling drilling and milling head can be tilted left and right, the worktable can be rotated, three-axis automatic feeder, and the grating digital display. The vertical spindle is easy to operate with stepless speed change, and the horizontal spindle has belt speed change, large torque, good stability, and can be used for large milling. High-precision grinding of all-steel spindle, ductile cast iron, and the shaft hole of the spindle box through fine boring, honing and internal stress relief treatment to ensure long-term and durable accuracy. With dovetail guide rails, built-in inserts, adjustable slack, and wear-resistant.

Introduction to Parameters

Drilling diameter 50mm face milling capability 100mm End mill capability 25mm Tapping ability M16 Boring diameter 120mm Worktable size 1000×240mm X-axis travel 600mm Y-axis travel 230mm Vertical and horizontal milling spindle taper MT4 The table rotates horizontally 45° Beam horizontal rotation 90° Vertical Swing of End Mill Headstock Head 90° Distance from spindle axis of vertical milling to surface of column 200-700mm Distance from end face of end milling spindle to table 100-480mm Distance from horizontal milling spindle axis to table 0-380mm End Mill Spindle Feed 120mm End milling spindle speed/stages 0-1750rpm/variable Horizontal milling spindle speed/series 60-1350rpm/9 End Mill Spindle Motor 1.5kw Horizontal Mill Spindle Motor 1.5kw Machine size 1120×1060×2035mm

Packing Size 1300×1140×2220mm Net weight/gross weight 850/1050KG

Machine Size

Net weight 850KG Gross weight 1050KG Packing size 1300*1140*2220mm The size of the product is measured manually, there is a small error, it is a common situation, and the actual product shall prevail.

Detailed Introduction

Vertical End mills, machine-clamped cutterheads, drills, etc. can be used, tapping, drilling, keyway milling, plane milling, boring, etc.

Horizontal type Horizontal lift table milling machines can be added with various cylindrical milling cutters, disc milling cutters, angle milling cutters, forming milling cutters and end milling cutters. Work all kinds of planes, slopes, grooves, etc. Parts with special shapes such as gears, cams, arc grooves and helical surfaces can be processed, equipped with universal milling heads, circular worktables, The indexing head and other milling machine accessories can also process holes for medium and small parts after using the boring bar.

Control Panel The electrical control device includes three-axis grating digital display and machine tool electrical control device, which is easy to operate.

Automatic feeding tool feeder to realize automatic feeding in XYZ direction

High precision, high speed milling head Vertical milling, infinitely variable speed 0~1750rpm, spindle taper MT4, the spindle can be fed quickly and inchingly, and can be tilted vertically and left and right 90°. Horizontal milling, spindle taper MT4, 9 speeds, need to change the belt position, 60\140\175\200\240\460\690\1090\1350 rpm

In horizontal milling, the spindle is used to install the tool holder and drive the milling cutter to rotate.

The beam can move along the horizontal rail of the bed, and its extension length is determined by the length of the toolbar.Adjustment. Can be rotated horizontally. The hanger supports the blade to reduce the bending and vibration of the blade.

The size of the worktable is 1000*240mm, XYZ direction automatic/manual feed, horizontal rotation angle, T-slot x5, which is convenient for clamping the workpiece. Spindle rapid feed 120mm Spindle micro-feed 0.005mm, one circle 2.5mm The longitudinal feed of the table is 0.02mm, and a circle is 4mm The horizontal feed of the table is 0.02mm, and one circle is 4mm Table lift feed 0.02mm, one circle 4mm

The heavy base is used to support the bed and the lifting table, and it contains cutting fluid.

Standard Accessories

Company Profile

CTMACH is one of the largest lathe manufacturers in China. We have 12 years of production and R&D experience. In 2019, we set up a foreign trade export sales department. We specialize in independent research and development, production, sales and after-sales service of small household machine tools, lathes, drilling and milling machines, small multifunctional drilling and milling machines, small CNC machines and cutting machines. Our products have been exported to more than 30 countries such as Europe and the United States, and these machines are used in many industries and fields. We always insist on technological innovation and standard production process. We have after-sales engineers and technicians engaged in mechanical design for many years.

Semi-Automatic PET Bottle Blowing Machine Bottle Making Machine Bottle Moulding Machine PET Bottle Making Machine is suitable for producing PET plastic containers and bottles in all shapes.

FAQ

1. who are we?
We are based in Anhui, China, start from 2019,sell to North America(30.00%),South America(10.00%),Eastern Europe(10.00%),Southeast Asia(10.00%),Mid East(10.00%),Eastern Asia(10.00%),Western Europe(10.00%),Central America(10.00%). There are total about 11-50 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3.what can you buy from us?
Lathe,Manual Lathe,CNC Milling Machine,CNC Machine Center,Band Saw

4. why should you buy from us not from other suppliers?
CTMACH is one of the largest manufacturers of bench lathes in China. We have 12 years of production and R&D experience. In 2019, we established foreign trade export sales department.

5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,DDP,DDU
Accepted Payment Currency:USD,EUR,JPY,CAD,CNY;
Accepted Payment Type: T/T,L/C,MoneyGram,Credit Card,PayPal,Western Union,Cash;
Language Spoken:English,Chinese,Spanish,Japanese,Portuguese,Arabic,French,Russian,Korean,Hindi,Italian