| After-sales Service: | Online Video Support |
|---|---|
| Warranty: | 13-Month |
| Type: | Band Sawing Machine |
| Samples: |
|---|
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier Element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Required band linear velocity is obtained by change of ratio on the belt pulley between the worm gear and the driving motor. Suitable speed of the arm lowering is obtained thanks to the valve controlling oil flow between the hydraulic cylinder chambers. Arm made of shaped spheroidal cast iron secures rigidity during operation and absorbs all vibrations. Control panel is situated close by the worm gear. Cutting band transmission system is composed of two cast iron wheels. The first wheel is a tensioning wheel (adjusted with a lever) and the second one is a drive wheel. Torque from the worm gear is directly transmitted to the tensioning wheel, while the worm gear is driven by an electric motor. Appropriate band angle is ensured through a set of roller bearings. The base of the machine is a rigid cuboid made of steel sheets inside which is a cooling fluid container with a flood coolant pump. Swivel vice makes it possible to cut material at 0-45o angles.
Tank for flood coolant draining and a container for chips are fixed to the upper part of the machine. Cast iron workbench is attached to the tank, which in turn is equipped with a vice for material clamping and to which the arm of the band saw is fixed. In the lower part of the machine base are holes for wheel axles. Safety during cutting process is ensured by an electric installation meeting all CE requirements. The machine is equipped with a limiting switch that stops the machine after cutting process is finished, an emergency button, a number of microswitches that switch the machine off when, e.g., the belt transmission guard or cutting band guard are opened. Additionally, our machine, as opposed to competitors, is equipped with a wire brush for band cleaning - it prevents the blade from blocking and ensures a more effective cutting.
| CTBS712N | ||
| Cutting range | 90° | Round 178mm Rectangle178×305mm |
| 45° | Round 127mm Rectangle120×125mm |
|
| Saw blade specifications | 19×0.9×2362mm | |
| range of rotation | 22\34\49\64mpm 50hz | |
| Transmission method | Belt conveyor | |
| Motor Power | Single Phase 1.1kw-220v-1.5hp | |
| Packing Size | 1250×510×1150mm | |
| N.W./G.W. | 140/180kg | |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}